Tag: M.W=0-100

Some common heterocyclic compound, 10111-08-7, name is Imidazole-2-carboxaldehyde, molecular formula is C4H4N2O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of Imidazole-2-carboxaldehyde

Compound 234.1. lH-Imidazole-2-carbonitrile. Into a 1-L round-bottom flask, was placed a solution of lH-imidazole-2-carbaldehyde (5 g, 52.04 mmol) in NN- dimethylformamide (200 mL). Triethylamine (10.8 mL, 77.97 mmol), hydroxylamine hydrochloride (3.95 g, 56.84 mmol, 1.10 equiv), 1-propanephosphonic anhydride solution and 2,4,6-tripropyl-l,3,5,2,4,6-trioxatriphosphorinane-2,4,6-trioxide solution (T3P) (36.4 g, 114.40 mmol) were added to the reaction. The reaction mixture was stirred for 4h at 100 C, cooled and then quenched with 500 mL of water/ice. The aqueous phase was extracted with 3 x 1L of ethyl acetate, then the combined organic layers was washed with 2 x 1L of brine, dried over anhydrous sodium sulfate and concentrated under reduced pressure. The residue was purified by silica gel chromatography with ethyl acetate/petroleum ether (1/2) as eluent to furnish 2 g (41%) of the title compound as an off-white solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 10111-08-7, its application will become more common.

Reference:
Patent; 3-V BIOSCIENCES, INC.; HEUER, Timothy Sean; OSLOB, Johan D.; MCDOWELL, Robert S.; JOHNSON, Russell; YANG, Hanbiao; EVANCHIK, Marc; ZAHARIA, Cristiana A.; CAI, Haiying; HU, Lily W.; WO2015/95767; (2015); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 1072-62-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1072-62-4, name is 2-Ethyl-1H-imidazole belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: The synthetic route is shown in Scheme 2. For example, to a stirred solution of compound 2 (506mg, 83 1 mmol) in 30 mL acetonitrile were added anhydrous K2CO3 (275 mg, 2mmol) and imidazole (204mg, 3mmol) at 25. Then the mixture was stirred at 25 for 24 h. The reaction mixture was filtered, and the 85 filtrate was evaporated under reduced pressure. The residue was treated with water (50 mL) and extracted 86 with dichloromethane (4×30 mL). The organic layer was combined, dried with anhydrous Na2SO4, and 87 concentrated under reduced pressure. The obtained residue was purified by silica gel chromatography 88 with chloroform/methanol (5:1) as eluent to give compounds 6-24 as solid.compound 6. 4?-(3-Imidazole-propoxy)-arctigenin. Yeild 83.33%.

The synthetic route of 2-Ethyl-1H-imidazole has been constantly updated, and we look forward to future research findings.

Reference:
Article; Hu, Yang; Liu, Lei; Li, Boyang; Shen, Yufeng; Wang, Gao-Xue; Zhu, Bin; European Journal of Medicinal Chemistry; vol. 163; (2019); p. 183 – 194;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 288-32-4, name is 1H-Imidazole, This compound has unique chemical properties. The synthetic route is as follows., Safety of 1H-Imidazole

To a mixture of toluene and imidazole was added triethyl amine followed by chloroacetonitrile.The reaction mixture was heated and maintained for 7 to 8 hrs. The reaction mass was cooledand the toluene layer was separated. To the reaction mass methylene dichloride was added, stined and filtered. The filtrate was distilled under vacuum. To the residue tetrahydrofuran was added and the reaction mixture is further distilled to obtain the title product. The product thus obtained was recrystallized in isopropyl alcohol. HPLC purity> 99.0 % Chiral purity>99.0%

According to the analysis of related databases, 288-32-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; GLENMARK PHARMACEUTICALS LIMITED; BHIRUD, Shekhar Bhaskar; BHUSHAN, Kumar Hari; ZHOPE, Sunil Sudhakar; GHADIGAONKAR, Shailesh Govind; SINGH, Pardeep; DESHMUKH, Shekhar Ashok; CHAND, Prem; (35 pag.)WO2016/92478; (2016); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 288-32-4,Some common heterocyclic compound, 288-32-4, name is 1H-Imidazole, molecular formula is C3H4N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In a 100 mL round bottom flask, Cu-grafted catalyst (0.05 g), aryl-boronic acid (1 mmol), N-H heterocycles (1.2 mmol), and 10 mLmethanol were stirred under nitrogen atmosphere, at 40C. Thereaction mixtures were collected at different time interval and identified by GC-MS and quantified by GC analysis. After the com-pletion of the reaction, the catalyst was filtered off and washedwith water followed by acetone and dried in oven. The filtrate wasextracted with ethyl acetate (3 × 20 mL) and the combined organiclayers were dried with anhydrous Na2SO4by vacuum. The filtratewas concentrated by vacuum and the resulting residue was puri-fied by column chromatography on silica gel to provide the desiredproduct.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-Imidazole, its application will become more common.

Reference:
Article; Islam, Sk.Manirul; Salam, Noor; Mondal, Paramita; Roy, Anupam Singha; Ghosh, Kajari; Tuhina; Journal of Molecular Catalysis A: Chemical; vol. 387; (2014); p. 7 – 19;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Electric Literature of 288-32-4, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 288-32-4 name is 1H-Imidazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

The starting material was prepared as follows: Imidazole (20.4 g, 300 mmol) and ethylene carbonate (28.6 g, 325 mmol) were heated at 125 C. for 1 hour. Once the CO2 evolution had ceased the reaction mixture was allowed to cool to ambient temperature, was suspended in methylene chloride/methanol (10/1, 50 ml) and was placed on the top of a short plug of silica. Elution was done using an increasingly polar solvent mixture of methylene chloride/methanol (100/10 up to 100/15). Removal of the solvent by evaporation gave crude 2-(imidazol-1-yl)ethanol (20.1 g, 60%).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1H-Imidazole, and friends who are interested can also refer to it.

Reference:
Patent; Zeneca Limited; US6294532; (2001); B1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 57090-88-7, name is 1H-Imidazole-4-carbonitrile, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 57090-88-7, name: 1H-Imidazole-4-carbonitrile

Example 1 Production of 1-(1H-imidazol-4-yl)-2-methyl-1-propanone A solution of 4-cyanoimidazole (42.7 g, 0.458 mol) in THF (500 ml) was added dropwise over 30 min to a solution (1.4 L, 1.47 mol, 3.2 equivalents) of 1.1 M isopropyl magnesium bromide in THF at 0 to 10°C under a nitrogen atmosphere. The mixture was stirred at 15 to 25°C for 3 h. Water (430 ml) and 10percent aqueous sulfuric acid solution (860 ml) were successively added dropwise, and the mixture was stirred at 30 min. A 30percent aqueous sodium hydroxide solution was added dropwise to adjust the pH to 8. After partitioning, the aqueous layer was extracted with ethyl acetate (300 ml * 2). The organic layer was combined, and the mixture was washed successively with saturated aqueous sodium hydrogencarbonate and saturated brine, and concentrated under reduced pressure. The concentration residue was broken up with isopropyl ether (300 ml). The crystals were collected by filtration and washed with isopropyl ether. The crystals were dried in vacuo (40°C) to give 1-(1H-imidazol-4-yl)-2-methyl-1-propanone (51.9 g, yield 82percent). 1H-NMR (CDCl3): delta1.25(6H, d, J=6.9Hz), 3.36(1H, quint, J=6.9Hz), 7.81(1H, s), 7.87(1H, s)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-Imidazole-4-carbonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Takeda Chemical Industries, Ltd.; EP1193258; (2002); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Related Products of 616-47-7, These common heterocyclic compound, 616-47-7, name is 1-Methyl-1H-imidazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

1-methylimidazole (1 mmol, 82.1 mg),Carbon tetrabromide (1.1 mmol, 364.8 mg) was placed in a 10 mL round bottom flask.Added 5 mL of N,N-dimethylformamide and sodium tert-butoxide (4.0 mmol, 384.4 mg).Stir at room temperature for 3 hours,TLC monitored the endpoint of the reaction. The mixture is poured into water and extracted with dichloromethane. The organic phase is collected, dried, and the dichloromethane is removed by rotary evaporation.Crude product. The crude product was subjected to silica gel column chromatography with petroleum ether and ethyl acetate as eluents (volume ratio = 10:1) to obtain 2-Bromo-1-methylimidazole (red-brown liquid, 101.4 mg, yield 63%).

The synthetic route of 616-47-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Liaoning University; Liang Fushun; Liu Xia; Han Zhengbo; Su Zhongmin; (10 pag.)CN107501023; (2017); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 288-32-4, name is 1H-Imidazole, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-32-4, Quality Control of 1H-Imidazole

To a stirred solution of imidazole (6.80 g, 100 mmol) in anhydrous dichloromethane (500 mL) was added BrCN (3.70 g, 33 mmol) and stirring was continued at reflux for 30 min. The mixture was cooled to room temperature and concentrated to afford di(imidazole-1-yl)methanimine (4.05 g, 72 %) as a pale yellow solid which was used without further purification.H NMR (DMSO-d6): 10.21 (br s, 1 H, NH), 8.09 (s, 2 H, 2 * CH), 7.57 (s, 2 H, 2 * CH), 7.12 (s, 2 H, 2 * CH).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-Imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SHIRE, LLC; FRANKLIN, Richard; TYSON, Robert G; GOLDING, Bernard T; WO2012/85586; (2012); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 57090-88-7, name is 1H-Imidazole-4-carbonitrile belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below. 57090-88-7

General procedure: A solution of 4-cyano-1H-imidazole (1000 mg, 10.74 mmol), 4-iodo -2-(trifluoromethyl)pyridine (3800 mg,14 mmol), (1R,2R)-N1,N2-dimethyl cyclohexane -1,2-diamine (150 mg, 1.07 mmol), CuI (200 mg, 1.07 mmol) and Cs2CO3 (7000 mg, 21.5 mmol) in 20 mL anhydrous DMF was stirred at 100 oC for 2 hours. The reaction mixture was cooled to room temperature and poured into 200 mL water. The mixture was extracted with ethyl acetate (80 mL*3). The organic layer were combined, washed by brine, dried by Na2SO4 and evaporated. The crude product was purified by silica flash column to afford compound 2 as white solid(1.5 g, 59percent yield).

The synthetic route of 57090-88-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zheng, Qiangang; Chen, Ziqi; Wan, Huixin; Tang, Shuai; Ye, Yan; Xu, Yuan; Jiang, Lei; Ding, Jian; Geng, Meiyu; Huang, Min; Huang, Ying; Bioorganic and Medicinal Chemistry Letters; vol. 28; 23-24; (2018); p. 3808 – 3812;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 3034-50-2, A common heterocyclic compound, 3034-50-2, name is Imidazole-4-carbaldehyde, molecular formula is C4H4N2O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a 1L three-necked round-bottomed flask with an addition funnel was added 3H-imidazole-4-carbaldehyde (4, 12 g, 0.125 mol) trityl chloride (38.3 g, 0.137 mol) and acetonitrile (400 mL). The mixture was stirred at rt to give a slurry. Triethylamine (30 mL, 0.215 mol) was added drop wise over 20 min. After the addition was complete, the reaction mixture was stirred at rt for 20 h. Hexane (40 mL) and water (400mL) were added. The slurry was stirred for 30 min and filtered. The cake was washed with water (3 × 100 mL) and dried in a vacuum oven at 50 C for 20 h to give 5 as a white solid (39.8 g, 94%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Suryadevara, Praveen Kumar; Racherla, Kishore Kumar; Olepu, Srinivas; Norcross, Neil R.; Tatipaka, Hari Babu; Arif, Jennifer A.; Planer, Joseph D.; Lepesheva, Galina I.; Verlinde, Christophe L.M.J.; Buckner, Frederick S.; Gelb, Michael H.; Bioorganic and Medicinal Chemistry Letters; vol. 23; 23; (2013); p. 6492 – 6499;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem