Category: 1977-72-6

1977-72-6, A common compound: 1977-72-6, name is 5-Fluoro-1H-benzo[d]imidazole, belongs to imidazoles-derivatives compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

Intermediate VI-10 5-fluorobenzimidazole (0.28 g, 2.04 mmol) was added to a 150 mL round bottom flask.After stirring potassium carbonate as a base (0.30 g, 2.20 mmol) and acetonitrile as a solvent at 50 C for 40 minutes,After cooling to room temperature, intermediate V (0.43 g, 1.70 mmol) was added and the mixture was warmed to 75 C and the mixture was traced to the end of the reaction.After further concentration, extraction, column chromatography separation, drying and the like, the intermediate X-10 (0.49 g) is obtained, the yield is 73.4%;White solid,

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Fluoro-1H-benzo[d]imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Southwest University; Zhou Chenghe; Man Nabaonei·lamohan·laao·yadafu; Wang Juan; (39 pag.)CN110305064; (2019); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 1977-72-6, These common heterocyclic compound, 1977-72-6, name is 5-Fluoro-1H-benzo[d]imidazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

CuBr 6 mg (0.04 mmol), TEMPO 5 mg (0.03 mmol), compounded in a 25 mL Schlenk reaction tube5-fluorobenzimidazole 55 mg (0.4 mmol),28 mg (0.2 mmol) of salicylic acid (0.2 mmol) and p-xylene (0.5 mL), followed by 33 muL of pyridine (0.4 mmol) were added and the reaction was stirred at 120°C for 36 hours under reflux.Cool to room temperature, transfer all to a 25 mL flask, spin off the solvent on a rotary evaporator, add an appropriate amount of silica gel to spin dry, and then use a 300-400 mesh silica gel column. The developing solvent used is petroleum ether:ethyl acetate=16: 1 to 6:1, that is, compound III-6 15 mg, yield 30percent, white solid

Statistics shows that 5-Fluoro-1H-benzo[d]imidazole is playing an increasingly important role. we look forward to future research findings about 1977-72-6.

Reference:
Patent; Southwest University; Cai Guixin; Xie Dan; (14 pag.)CN107955020; (2018); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 1977-72-6, These common heterocyclic compound, 1977-72-6, name is 5-Fluoro-1H-benzo[d]imidazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

CuBr 6 mg (0.04 mmol), TEMPO 5 mg (0.03 mmol), compounded in a 25 mL Schlenk reaction tube5-fluorobenzimidazole 55 mg (0.4 mmol),28 mg (0.2 mmol) of salicylic acid (0.2 mmol) and p-xylene (0.5 mL), followed by 33 muL of pyridine (0.4 mmol) were added and the reaction was stirred at 120°C for 36 hours under reflux.Cool to room temperature, transfer all to a 25 mL flask, spin off the solvent on a rotary evaporator, add an appropriate amount of silica gel to spin dry, and then use a 300-400 mesh silica gel column. The developing solvent used is petroleum ether:ethyl acetate=16: 1 to 6:1, that is, compound III-6 15 mg, yield 30percent, white solid

Statistics shows that 5-Fluoro-1H-benzo[d]imidazole is playing an increasingly important role. we look forward to future research findings about 1977-72-6.

Reference:
Patent; Southwest University; Cai Guixin; Xie Dan; (14 pag.)CN107955020; (2018); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 1977-72-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1977-72-6, name is 5-Fluoro-1H-benzo[d]imidazole belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 5-fluoro-1H-benzoimidazole (0.50 g, 0.00367 mol) in anhydrous THF (10 mL), which was cooled in an ice water bath under an argon atmosphere, was added sodium hydride (60percent dispersion in oil, 0.44 g, 0.011 mol). After addition, the resulting mixture was stirred for 2 h. (S)-N-(4-cyano-3-(trifluoromethyl)phenyl)-2-methyloxirane-2-carboxamide (1.29 g, 0.00367 mol) was added to above solution, and the resulting reaction mixture was allowed to stir overnight at room temperature under argon. The reaction was quenched by water, extracted with ethyl acetate. The organic layer was dried with MgSO4, filtered, and concentrated under vacuum. The product was purified by a silicon gel column using methylene chloride and methanol (19:1) as eluent to afford 0.17 g of the desired compound as white solid. 1H NMR (400 MHz, DMSO-d6)^10.37 (s, 1H, NH), 8.31 (d, J = 17.2 Hz, 1H, ArH), 8.16-8.05 (m, 3H, ArH), 7.62-7.56 (m, 1H, ArH), 7.44 (dd, J = 9.60 Hz, J = 2.4 Hz, 1H, ArH), 7.04 (dd, J = 9.60 Hz, J = 2.4 Hz, 1H, ArH), 6.49 (s, 1H, OH), 4.65 (d, J = 5.6 Hz, 1H, CH), 4.62 (d, J = 5.6 Hz, 1H, CH), 1.47 (s, 3H, CH3). Mass (ESI, Negative): 404.8[M-H]-; (ESI, Positive): 429.0[M+Na]+.

The synthetic route of 5-Fluoro-1H-benzo[d]imidazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GTX, INC.; UNIVERSITY OF TENNESSEE RESEARCH FOUNDATION; NARAYANAN, Ramesh; MILLER, Duane D.; PONNUSAMY, Thamarai; HWANG, Dong-Jin; HE, Yali; PAGADALA, Jayaprakash; DUKE, Charles B.; COSS, Christopher C.; DALTON, James T.; (296 pag.)WO2016/172358; (2016); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

1977-72-6, A common compound: 1977-72-6, name is 5-Fluoro-1H-benzo[d]imidazole, belongs to imidazoles-derivatives compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

Intermediate VI-10 5-fluorobenzimidazole (0.28 g, 2.04 mmol) was added to a 150 mL round bottom flask.After stirring potassium carbonate as a base (0.30 g, 2.20 mmol) and acetonitrile as a solvent at 50 C for 40 minutes,After cooling to room temperature, intermediate V (0.43 g, 1.70 mmol) was added and the mixture was warmed to 75 C and the mixture was traced to the end of the reaction.After further concentration, extraction, column chromatography separation, drying and the like, the intermediate X-10 (0.49 g) is obtained, the yield is 73.4%;White solid,

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Fluoro-1H-benzo[d]imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Southwest University; Zhou Chenghe; Man Nabaonei¡¤lamohan¡¤laao¡¤yadafu; Wang Juan; (39 pag.)CN110305064; (2019); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem