Month: September 2021

Synthetic Route of 3034-50-2, A common heterocyclic compound, 3034-50-2, name is Imidazole-4-carbaldehyde, molecular formula is C4H4N2O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a 1L three-necked round-bottomed flask with an addition funnel was added 3H-imidazole-4-carbaldehyde (4, 12 g, 0.125 mol) trityl chloride (38.3 g, 0.137 mol) and acetonitrile (400 mL). The mixture was stirred at rt to give a slurry. Triethylamine (30 mL, 0.215 mol) was added drop wise over 20 min. After the addition was complete, the reaction mixture was stirred at rt for 20 h. Hexane (40 mL) and water (400mL) were added. The slurry was stirred for 30 min and filtered. The cake was washed with water (3 × 100 mL) and dried in a vacuum oven at 50 C for 20 h to give 5 as a white solid (39.8 g, 94%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Suryadevara, Praveen Kumar; Racherla, Kishore Kumar; Olepu, Srinivas; Norcross, Neil R.; Tatipaka, Hari Babu; Arif, Jennifer A.; Planer, Joseph D.; Lepesheva, Galina I.; Verlinde, Christophe L.M.J.; Buckner, Frederick S.; Gelb, Michael H.; Bioorganic and Medicinal Chemistry Letters; vol. 23; 23; (2013); p. 6492 – 6499;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Application of 4856-97-7, These common heterocyclic compound, 4856-97-7, name is (1H-Benzoimidazol-2-yl)methanol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The resulting solid (1H-benzimidazol-2-yl) methanol (34 mmol) was dissolved in 250 mL of dichloromethane and stirredFollowed by addition of manganese dioxide (0.68 mmol). The temperature was raised to 40 C and stirring was continued for 2 hours to monitor the reaction. After the reaction is complete, the product is evaporated to drynessDichloromethane, 150 mL of tetrahydrofuran was added. Directly to the next step

Statistics shows that (1H-Benzoimidazol-2-yl)methanol is playing an increasingly important role. we look forward to future research findings about 4856-97-7.

Reference:
Patent; Shenyang Pharmaceutical University; Zhao Linxiang; Liu Dan; Li Kun; Ma Tianyi; Jing Yongkui; (13 pag.)CN107118249; (2017); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 1615-14-1, name is 2-(1H-Imidazol-1-yl)ethanol, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1615-14-1, HPLC of Formula: C5H8N2O

Example 10: 2-Imidazol-l-ylethyl 4-[(4-methoxyphenyl)amino]-6-(methylcarbamoyl)- quinoIine-3-carboxyIate. To a suspension of 4-[(4-methoxyphenyl)amino]-6-(methylcarbamoyl)-quinoline-3- carboxylic acid (1.0 g, 2.8 mmol) in dry tetrahydrofuran (15 mL) at 0 0C under nitrogen atmosphere was added l-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride (2.0 g, 11.2 mmol), hydroxybenzotriazole (HOBt, 0.64 g, 4.84 mmol), triethylamine (3.2 mL, 2.3 mmol) and 2-hydroxyethylimidazole (0.65 g, 3.4 mmol). The reaction mixture was slowly brought to room temperature and stirred for 12 hours. The reaction mixture was concentrated in vacuo and after aqueous work up, extracted with dichloromethane, dried over anhydrous sodium sulfate and concentrated in vacuo. The residue was purified on column (flash chromatography on alumina gel, chloroform/methanol 99.8 : 0.2) to give 0.25 g (23 % yield) of 2-imidazol-l-ylethyl 4-[(4-methoxyphenyl)amino]-6-(methylcarbamoyl)quinoline-3-carboxylate as a pale yellow solid. LC-MS (m/z) 446.2 (M+l). 1H NMR delta (CDCl3) 10.65 (s, IH), 9.16 (s, IH), 8.05 (dd, IH, J1 = 8.7 Hz, J2 = 1.8 Hz), 7.97 (d, IH, J= 8.7 Hz), 7.84 (s, IH), 7.76 (s, IH), 7.22-7.10 (m, 3H), 7.08 (s, IH), 6.97 (d, 2H, J= 9.0 Hz), 5.67 (broad s, IH), 4.75 – 4.60 (m, 2H), 4.50-4.35 (m, 2H), 3.87 (s, 3H), 2.88 (s, 3H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(1H-Imidazol-1-yl)ethanol, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; CLANOTECH AB; MALM, Johan; RINGOM, Rune; CALDIROLA, Patrizia; WESTMAN, Jacob; WO2010/133669; (2010); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 705-09-9, name is 2-(Difluoromethyl)-1H-benzo[d]imidazole, A new synthetic method of this compound is introduced below., Application In Synthesis of 2-(Difluoromethyl)-1H-benzo[d]imidazole

Preparation Example 1 To a solution of 4,6-dichloro-2-(methylsulfanyl)pyrimidine (5 g) in N,N-dimethylformamide (50 mL) were added potassium carbonate (5.3 g) and 2-(difluoromethyl)-1H-benzimidazole (3.9 g), and the mixture was stirred at room temperature for 5 hours. To the reaction mixture was added water, followed by extraction with ethyl acetate. The organic layer was washed with saturated brine and dried over anhydrous magnesium sulfate. The solvent was evaporated under reduced pressure and then the residue was purified by silica gel column chromatography (hexane:ethyl acetate) to obtain 1-[6-chloro-2-(methylsulfanyl)pyrimidin-4-yl]-2-(difluoromethyl)-1H-benzimidazole (5.49 g) as a white powder.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Astellas Pharma Inc.; TAKAHASHI, Fumie; IMADA, Sunao; ASANO, Toru; KOZUKI, Yoshihiro; MAEDA, Junko; KATO, Koji; FUKAHORI, Hidehiko; SHIWAKU, Masahiko; US2013/150364; (2013); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Reference of 39070-14-9, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 39070-14-9 as follows.

A mixture of 2-(1-methyl-5-nitro-1H-imidazol-2-yl)-ethanol (1.32 mmol) and 1-fluoro- 3 -nitrobenzene (1.67 mmol) and K2C03(465 mg, 3.36 mmol) in DMF (5 mL) was stirred 2 hours at ambient temperature followed by heating. The reaction was worked-up by extraction. The residue was purified by prep-HPLC with the following condition: column: XBridge preparative CI 8 OBD column 19x 150 mm, 5 um; mobile phase A: water (10 mmol/L NH4HCO3), mobile phase B: ACN; flow rate: 20 mL/min; gradient elution. The product-containing fractions were collected and then lyophilized to give l-methyl-5-nitro-2-(3-nitro-phenoxymethyl)-lH- imidazole. LC-MS: (ES, m/z) 279.07 (M+H)+; analysis: C, 47.53; H, 3.69; N, 20.24; O, 28.85.

According to the analysis of related databases, 39070-14-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; GENCIA CORPORATION; KHAN, Shaharyar; (80 pag.)WO2018/129258; (2018); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 57090-88-7, name is 1H-Imidazole-4-carbonitrile belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below. 57090-88-7

General procedure: A solution of 4-cyano-1H-imidazole (1000 mg, 10.74 mmol), 4-iodo -2-(trifluoromethyl)pyridine (3800 mg,14 mmol), (1R,2R)-N1,N2-dimethyl cyclohexane -1,2-diamine (150 mg, 1.07 mmol), CuI (200 mg, 1.07 mmol) and Cs2CO3 (7000 mg, 21.5 mmol) in 20 mL anhydrous DMF was stirred at 100 oC for 2 hours. The reaction mixture was cooled to room temperature and poured into 200 mL water. The mixture was extracted with ethyl acetate (80 mL*3). The organic layer were combined, washed by brine, dried by Na2SO4 and evaporated. The crude product was purified by silica flash column to afford compound 2 as white solid(1.5 g, 59percent yield).

The synthetic route of 57090-88-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zheng, Qiangang; Chen, Ziqi; Wan, Huixin; Tang, Shuai; Ye, Yan; Xu, Yuan; Jiang, Lei; Ding, Jian; Geng, Meiyu; Huang, Min; Huang, Ying; Bioorganic and Medicinal Chemistry Letters; vol. 28; 23-24; (2018); p. 3808 – 3812;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 288-32-4, name is 1H-Imidazole, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-32-4, Quality Control of 1H-Imidazole

To a stirred solution of imidazole (6.80 g, 100 mmol) in anhydrous dichloromethane (500 mL) was added BrCN (3.70 g, 33 mmol) and stirring was continued at reflux for 30 min. The mixture was cooled to room temperature and concentrated to afford di(imidazole-1-yl)methanimine (4.05 g, 72 %) as a pale yellow solid which was used without further purification.H NMR (DMSO-d6): 10.21 (br s, 1 H, NH), 8.09 (s, 2 H, 2 * CH), 7.57 (s, 2 H, 2 * CH), 7.12 (s, 2 H, 2 * CH).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-Imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SHIRE, LLC; FRANKLIN, Richard; TYSON, Robert G; GOLDING, Bernard T; WO2012/85586; (2012); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

These common heterocyclic compound, 5098-11-3, name is 5-Amino-1H-imidazole-4-carbonitrile, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C4H4N4

Example 1 : General procedure for the preparation of cyano-imidazo[1 ,5- a]pyrimidines of general formula (I) following Scheme 1N-[3-(8-cyano-imidazo[1 ,5-a]pyrimidin-4-yl)-phenyl]-N-ethyl- ethanesulfonamide0.035 g (0.32 mmol) of delta-amino-I H-imidazole^-carbonitrile and 0.1 g (0.32 mmol) of N-[3-[3-(dimethylamino)-1 -oxo-2-propenyl]phenyl]-N-ethyl- ethanesulfonamide were dissolved in 10 ml of glacial acetic acid. After refluxing for 4 hours, the solvent was removed by reduced pressure distillation. To the resultant residue 10 ml of dichloromethane and 10 ml of a saturated solution of sodium bicarbonate were added. The two layers were separated, and the aqueous layer was washed with 10 ml of dichloromethane. The organic layers were washed with 10 ml of water and dried over magnesium sulfate. The dichloromethane layer was evaporated to dryness to yield an oil which, in the presence of ethyl acetate gave a yellow solid, 58 mg (yield 51%) of N-[3-(8-cyano-imidazo[1 ,5-a]pyrimidin-4-yl)-phenyl]-N-ethyl- ethanesulfonamide1H NMR (400 MHz, CDCI3): delta 1.2 (3H, t, J= 7.2 Hz), 1.41 (3H, t, J= 7.6 Hz), 3.08 (2H, q, J= 7.6 Hz), 3.84 (2H, q, J= 7.6 Hz), 6.85 (1 H, d, J= 4 Hz), 7.58- 7.71 (3H, m), 7.76-7.77 (1 H, m), 8.25 (1 H, s), 8.56 (1 H, d, J= 4 Hz). MS (ES) m/z = 356 (MH+) HPLC = 94.2%

The synthetic route of 5-Amino-1H-imidazole-4-carbonitrile has been constantly updated, and we look forward to future research findings.

Reference:
Patent; FERRER INTERNACIONAL, S. A.; WO2006/84835; (2006); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 5465-29-2, name is 2-Propylbenzimidazole, A new synthetic method of this compound is introduced below., Application In Synthesis of 2-Propylbenzimidazole

The 1H-benzo[d]imidazole 5a(2.50 mmol) was dissolved in 10 ml of abs. DMF. Sodium hydride(60% dispersion in mineral oil) (0.2 g, 5 mmol) was added withcooling. After the gas formation stopped, 40-bromomethyl-[1,10-biphenyl]-2-carbonitrile dissolved in 2 ml of abs. DMF was addeddropwise and the solutionwas stirred for 1 h under cooling in an icebath and further 2 h at RT. Water was added and after the solutionwas acidified with HCl, the product was extracted three times withmethylene chloride. The combined organic layers were dried overNa2SO4 and evaporated to dryness in vacuo. The crude product waspurified by column chromatography on silica gel with methylenechloride/methanol (95:5) and recrystallized from diethyl ether/methanol.

The synthetic route of 5465-29-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Obermoser, Victoria; Urban, Margarethe E.; Murgueitio, Manuela S.; Wolber, Gerhard; Kintscher, Ulrich; Gust, Ronald; European Journal of Medicinal Chemistry; vol. 124; (2016); p. 138 – 152;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 71759-87-0, name is 4-Iodo-1-methyl-1H-imidazole, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C4H5IN2

To a solution of chloride 2 (scheme 1) (2.45 g, 14.4 mmol) in THF (48 mL) at -78C was slowly added w-BuLi (2.5M in hexane, 7.2 mL, 18.0 mmol). The reaction mixturewas stirred for one hour [at -78C] followed by slow addition of ZnCl (0.5M in THF, 36mL, 18.0 mmol). In a few minutes the reaction mixture was allowed to warm to roomtemperature and stirred for one hour.[0422] A solution of 4-iodo-l -methyl- 1/f-imidazole (1.50 g, 7.2 mmol) Tet. Lett. 2004.45. 5529] in THF (5 mL) and the tetrakis(triphenylphosphine) palladium (0) (0.83 g, 0.72mmol) were added to the reaction mixture which was heated to reflux for 1 hour, cooled toroom temperature, diluted with aqueous ammonium hydroxide and, finally neutralized witha IN HC1 solution. The acidic solution was extracted with DCM, the extract was washedwith water and brine, dried over anhydrous magnesium sulfate, filtered and evaporatedunder reduced pressure. The residue was purified by flash chromatography (eluents DCM,then DCM-MeOH, 97:3) to afford title compound 175 (1.45 g, 81% yield) as a yellow solid.LRMS (M+l) 263.9 (100%), 265.9 (33%).

According to the analysis of related databases, 71759-87-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; METHYLGENE, INC.; WO2006/10264; (2006); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem