Introduction of a new synthetic route about 33529-02-1

Statistics shows that 1-Decyl-1H-imidazole is playing an increasingly important role. we look forward to future research findings about 33529-02-1.

Electric Literature of 33529-02-1, These common heterocyclic compound, 33529-02-1, name is 1-Decyl-1H-imidazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In a 250 mL two-neck round bottom flask equipped with a condenser linked to the vacuum-argon line, N-butylimidazole (title 99% w/w, Alfa Aesar) (4.2 g, 33.4 mmol) was charged and after degassing with three vacuum/argon cycles, 1H,1H,2H,2H-perfluorooctyliodide 96% w/w, Aldrich) (23.8 g, 50.1 mmol) was added. After three more vacuum/argon cycles the temperature of the oil bath was increased from 25 C to 120 C in 10 min. After heating for 6 h, NMR analysis of the crude reaction mixture (Fig. 6S, ESI) showed that the reaction went to completion and the occurrence, together with the target molecule C4-I, of the by-products N-butyl-imidazolium iodide and 1H,1H,2H-perfluoro-1-octene ( Scheme 1 ) typical of a Hofmann elimination of the imidazolium salts [29-31]. By cooling the presence of two phases was observed: a viscous red liquid (containing C4-I, N-butyl-imidazolium iodide and C6F13CH = CH2) at the top and a pale yellow liquid (the unreacted 1H,1H,2H,2H-perfluorooctyl iodide with C6F13CH = CH2) at the bottom. The phases were separated by decantation and the viscous red liquid washed three times with petroleum ether (3 * 50 mL) and three times with diethyl ether (3 * 50 mL). The solvent and the volatile by-product C6F13CH = CH2 (bp = 102-104) were eliminated under vacuum (30 C/53 Pa). After the work-up 1H NMR of the red oil showed peaks of C4-I (75%) and of N-butyl-imidazolium iodide (25%). The raw product (20 g) was dissolved in 20 mL of dichloromethane and filtered under argon on anhydrous celite (40 g) previously wetted with 200 mL of dichloromethane. The filtration was repeated two times. Celite was then washed with 80 mL of dichloromethane. Evaporation of the solvent (30 C/53 Pa) gives a red sticky wax with a yield of 75.1% (15.0 g, 25 mmol).

Statistics shows that 1-Decyl-1H-imidazole is playing an increasingly important role. we look forward to future research findings about 33529-02-1.

Reference:
Article; Zama, Isabella; Gorni, Giacomo; Borzatta, Valerio; Cassani, Maria Cristina; Crupi, Cristina; Di Marco, Gaetano; Journal of Molecular Liquids; vol. 223; (2016); p. 749 – 753;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem